AMSOIL INTERCEPTOR™ Synthetic 2-Cycle Oil is formulated with a proprietary
blend of the finest synthetic base oils and additives available today. This unique AMSOIL
Chemistry represents a breakthrough development in the field of two-cycle engine lubrication.
The backbone of AMSOIL INTERCEPTOR 2-Cycle Oil is a specially developed molecularly saturated
synthetic base oil. This, combined with a robust additive package, ensures exceptional
lubricity, cleanliness and optimum clean-burning characteristics. Extensive research and
testing, including a full snowmobiling season in severe Rocky Mountain applications, has proven
that wear on cylinders, pistons and bearings is significantly reduced. And with up to 30
percent more detergency and dispersancy additives than typical two-cycle oils, AMSOIL
INTERCEPTOR virtually eliminates hard carbon deposits that cause exhaust power valve sticking,
ring sticking and preignition-promoting "hot spots" in the combustion chamber.
- Helps prevents hard carbon deposits that cause exhaust power valve
sticking and ring sticking.
- Superior lubricity controls cylinder, piston and bearing
wear.
- Reduces smoke and odor associated with two-cycle
engines.
- Helps prevent plug fouling.
- Provides exceptional SAE #4 cold temperature fluidity (-58°F pour
point).
- Versatile and excellent for all types of recreational
equipment.
- Protects against rust.
- Helps prevent pre-detonation from combustion chamber "hot
spots."
See Article: Two-Cycle Engine Applications and Lubrication
Needs
PRODUCT DESCRIPTION
AMSOIL INTERCEPTOR Synthetic
2-Cycle Oil is formulated with a proprietary blend of the finest synthetic base oils and
additives available today. This unique AMSOIL chemistry represents a breakthrough
development in the field of two-cycle engine lubrication.
The backbone of AMSOIL INTERCEPTOR 2- Cycle Oil is a specially
developed molecularly saturated synthetic base oil. This, combined with a potent additive
package, ensures exceptional lubricity, cleanliness and optimum clean- burning characteristics.
Extensive research and testing, including a full snowmobiling season in severe Rocky Mountain
applications, has proven that wear on cylinders, pistons and bearings is dramatically reduced.
And with up to 30 percent more detergency and dispersancy than typical two-cycle oils, AMSOIL
INTERCEPTOR virtually eliminates damaging deposits on piston skirts, ring grooves and exhaust
power valves.
APPLICATIONS (2-Cycle Recommendations Chart)
AMSOIL INTERCEPTOR Synthetic 2-Cycle Oil is recommended as an injector oil or at
a 50:1 mix ratio in carbureted, electronic fuel Injected (EFI) and direct fuel injected
(DFI) snowmobiles, personal watercraft, motorcycles, ATVs and jet boats, including, but not
limited to, those manufactured by Bombardier®, Yamaha®, Arctic Cat®, Polaris®, Kawasaki®,
Suzuki® and Honda®.
It is recommended wherever JASO FC or API TC two-cycle oils are
specified. INTERCEPTOR is a premium quality replacement for recreational equipment
manufacturers' branded two-cycle oils. It is compatible with most mineral and synthetic
two-cycle oils, however, for best performance, mixing oils should be minimized.
400,000 Miles of Severe Snowmobile Field
testing With No Deposit Buildup, Power Valve Sticking, Ring Sticking or Engine
Failures.
Subjected to adverse field testing conditions in the
Rocky Mountains, including long trail rides, high RPM powder riding and steep hill climbs,
AMSOIL INTERCEPTOR demonstrated superior wear protection and outstanding deposit
control.
|
|
| No carbon deposits are detectable in the functioning
region of the exhaust power valves, resulting in "no stick" performance, continuous
valve operation and reduced maintenance. |
 |
 |
| Pistons show no scoring, little or no wear and no heavy
deposits, and wrist pins show no discoloration from heat. In fact, the original
machine markings on the pistons are still visible. |
Cylinder head is clean with no deposits, preventing pre-ignition
problems. |
|
TYPICAL TECHNICAL PROPERTIES
INTERCEPTOR™ Synthetic 2-Cycle Oil
|
|
Kinematic Viscosity @ 100°C, cSt (ASTM
D-445)
|
8.5 |
|
Kinematic Viscosity @ 40°C, cSt (ASTM
D-445)
|
45.1 |
|
Viscosity Index (ASTM D-2270)
|
170 |
|
Pour Point °C (°F) (ASTM D 97)
|
-50 (-58) |
|
Flash Point °C (°F) (ASTM D 92)
|
86 (187) |
|
Fire Point °C (°F) (ASTM D 92)
|
86 (187) |
|
ASTM Brookfield Viscosity @ -40°C (°F)
|
12100 cP |
|
SAE Fluidity/Miscibility
|
#4 |
|
DANGER: harmful or fatal if
swallowed. Contains synthetic lubricant and petroleum distillates. If
swallowed do not induce vomiting. Contact a physician immediately.
Keep away from fire, heat and open flame. Use with adequate
ventilation. Avoid frequent or prolonged skin contact. Flush eyes
with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.
|
